1) La descarga del recurso depende de la página de origen
2) Para poder descargar el recurso, es necesario ser usuario registrado en Universia

Opción 1: Descargar recurso

Detalles del recurso


Indoor Localization and Tracking have become an attractive research topic because of the wide range of potential applications. These applications are highly demanding in terms of estimation accuracy and rise a challenge due to the complexity of the scenarios modeled. Approaches for these topics are mainly based on either deterministic or probabilistic methods, such as Kalman or Particles Filter. These techniques are improved by fusing information from different sources, such as wireless or optical sensors. In this paper, a novel MUlti-sensor Fusion using adaptive fingerprint (MUFAF) algorithm is presented and compared with several multi-sensor indoor localization and tracking methods. MUFAF is mainly divided in four phases: first, a target position estimation (TPE) process is performed by every sensor; second, a target tracking process stage; third, a multi-sensor fusion combines the sensor information; and finally, an adaptive fingerprint update (AFU) is applied. For TPE, a complete environment characterization in combination with a Kernel density estimation technique is employed to obtain object position. A Modified Kalman Filter is applied to TPE output in order to smooth target routes and avoid outliers effect. Moreover, two fusion methods are described in this paper: track-to-track fusion and Kalman sensor group fusion. Finally, AFU will endow the algorithm with responsiveness to environment changes by using Kriging interpolation to update the scenario fingerprint. MUFAF is implemented and compared in a test bed showing that it provides a significant improvement in estimation accuracy and long-term adaptivity to condition changes.

Pertenece a

Archivo Digital UPM  


Belmonte Hernández, Alberto -  Hernández Peñaloza, Gustavo Adolfo -  Álvarez García, Federico -  Conti, Giuseppe - 

Id.: 71305459

Idioma: eng  - 

Versión: 1.0

Estado: Final

Tipo:  application/pdf - 

Palabras claveElectrónica - 

Tipo de recurso: info:eu-repo/semantics/article  -  Artículo  -  PeerReviewed  - 

Tipo de Interactividad: Expositivo

Nivel de Interactividad: muy bajo

Audiencia: Estudiante  -  Profesor  -  Autor  - 

Estructura: Atomic

Coste: no

Copyright: sí

: http://creativecommons.org/licenses/by-nc-nd/3.0/es/

Formatos:  application/pdf - 

Requerimientos técnicos:  Browser: Any - 

Relación: [IsBasedOn] IEEE Sensors Journal, ISSN 1530-437X, 2017-06-15, Vol. 17, No. 15
[References] http://ieeexplore.ieee.org/document/7949009/
[References] info:eu-repo/grantAgreement/EC/H2020/690090/EU/ICT services for Life Improvement For the Elderly/ICT4Life
[References] info:eu-repo/semantics/altIdentifier/doi/10.1109/JSEN.2017.2715978

Fecha de contribución: 13-may-2018



Otros recursos del mismo autor(es)

  1. ICT4Life open source libraries supporting multimodal analysis of different diseases The ICT4Life Open Source framework contains libraries for acquiring and processing data from differe...
  2. Person tracking association using multi-modal systems In this paper, a novel multi-modal method for person identification in indoor environments is presen...
  3. A multi-sensor fusion scheme to increase life autonomy of elderly people with cognitive problems Elderly people care is a major challenge for the smart-cities of future. This represents a valuable ...
  4. Orazione funebre a Gioacchino Taddei / Acquisition made accessible thanks to the generous support of the Frederick J. and Margret L. Worden...

Otros recursos de la mismacolección

  1. Los edificios abovedados de Luis Moya Los edificios abovedados de Luis Moya
  2. Urban squatting in Latin America: relevance of ‘guided occupancy’ While the illegal occupation of land by families lacking the means to acquire housing on the market ...
  3. El dibujar del arquitecto más allá del proyectar. A propósito de Luis Moya El dibujar del arquitecto más allá del proyectar. A propósito de Luis Moya
  4. Free form metallization of solar cells using Laser Induced Forward Transfer Front metallization is an expensive, fundamental step in the fabrication of solar cells. Laser addit...
  5. Finite element method modeling applied to laser crystallization of amorphous silicon The crystallization by laser of amorphous or microcrystalline silicon films allows to obtain thin, h...

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.