1) La descarga del recurso depende de la página de origen
2) Para poder descargar el recurso, es necesario ser usuario registrado en Universia

Opción 1: Descargar recurso

Opción 2: Descargar recurso

Detalles del recurso


Closed loop Hall-effect current sensors used in power electronic applications require high bandwidth and small transient errors. For this, the behaviour of a closed loop Hall-e ect current sensor is modeled. Analytical expression of the step response of the sensor using this model is used to evaluate the performance of the PI compensator in the current sensor. Based on this expression a procedure is proposed to design parameters of the PI compensator for fast dynamic performance and for small transient error. A prototype closed loop Hall-effect current sensor is built in the laboratory. A PI compensator based on the procedure devised earlier is designed for the sensor. A power electronic converter based current source is designed and fabricated in the labo-ratory for validation of steady state and transient performance of Hall-effect current sensors. A novel hardware topology is proposed, using which the same hardware set-up can produce both step current and sinusoidal current in its designated sections without any modi cation in the hardware con guration. It produces step current of controlled peak value upto 100A and controlled rate of change with both positive and negative dtdi . The step transition time is less than 200ns. The dtdi is adjustable upto a limit of 300A/ s to verify the dtdi following capability of the sensor. The same current source produces continuous sinusoidal current of controlled magnitude upto 75A peak and controlled frequency from 1Hz to 1000Hz. The magnitude and the frequency of the sinusoidal current can be varied on-line like a voltage function generator. The hardware of the current source is designed to consume minimal ac-tive power from mains during continuous sinusoidal current generation. This current source is used in experimental veri cation of the steady state and the transient performance of the designed laboratory current sensor. The transient performance of the laboratory current sensor is observed to be superior to state-of-the-art commercial current sensors available for power electronic applications.

Pertenece a

ETD at Indian Institute of Science  


Kumar, Ashish - 

Id.: 71076314

Idioma: inglés (Estados Unidos)  - 

Versión: 1.0

Estado: Final

Palabras claveHall -  Effect Current Sensors - 

Tipo de recurso: Thesis  - 

Tipo de Interactividad: Expositivo

Nivel de Interactividad: muy bajo

Audiencia: Estudiante  -  Profesor  -  Autor  - 

Estructura: Atomic

Coste: no

Copyright: sí

Requerimientos técnicos:  Browser: Any - 

Relación: [References] G26649

Fecha de contribución: 10-mar-2018



Otros recursos de la mismacolección

  1. Discharge Plasma Supported Mariculture and Lignite Waste for NOx Cleaning in Biodiesel Exhaust : Direct and Indirect Methods One major aspect of environmental pollution affecting human life and climate is air pollution. The h...
  2. Control Strategies for Seamless Transition between Grid Connected and Islanded Modes in Microgrids The popularity of distributed generating (DG) sources have been increasing over the past few years. ...
  3. Developmental Studies on Ultra Wide Band Type High Power Electromagnetic Radiating System for Use as an Intentional Electromagnetic Interference Source The electronic control, instrumentation and communication hardware is becoming more and more compact...
  4. Low Switching Frequency Pulse Width Modulation for Induction Motor Drives Induction motor (IM) drives are employed in a wide range of industries due to low maintenance, impro...
  5. Active Power Flow Tracing for Preventive Control in Deregulated Power Systems Modern day power systems present an open access environment, inspiring participation from small scal...

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.