1) La descarga del recurso depende de la página de origen
2) Para poder descargar el recurso, es necesario ser usuario registrado en Universia


Opción 1: Descargar recurso

Opción 2: Descargar recurso

Detalles del recurso

Descripción

Photo-reversible polyurethane (PU) coatings based on coumarin diol (CD) are obtained. Initially, pre-polymers based on different amounts of coumarin (5, 15, and 25 mol%) and 1,6-hexamethylene diisocyanate are prepared to obtain PUs with a large incorporation of CD and high molecular weight. The pre-polymer is posterior reacted with poly(ε-caprolactone) diol (PCL-diol), either with molecular weight (Formula presented.) = 530 or 2000 g mol. The thermal stabilities of the PUs are studied using thermogravimetric analysis. Polymers with a higher content of CD present higher stability. The thermal transitions and the mechanical response are analyzed using differential scanning calorimetry and strain-stress tests, respectively. Moreover, the photo-reversibility of CD-based PUs is followed by UV absorption. In general, photo-dimerization induces better mechanical properties of the final PUs. Materials obtained with short PCL-diol ((Formula presented.) = 530 g mol) and the highest amount of CD present higher reversibility processes. Therefore, these polymers are promising for application as coating systems. (Figure presented.).

Pertenece a

Digital.CSIC  

Autor(es)

Salgado, Cástor -  Arrieta, Marina P. -  Peponi, Laura -  Fernández -  García, Marta -  López, Daniel - 

Id.: 70077644

Idioma: eng  - 

Versión: 1.0

Estado: Final

Palabras clavePhotoreversible - 

Tipo de recurso: Artículo  - 

Tipo de Interactividad: Expositivo

Nivel de Interactividad: muy bajo

Audiencia: Estudiante  -  Profesor  -  Autor  - 

Estructura: Atomic

Coste: no

Copyright: sí

: closedAccess

Requerimientos técnicos:  Browser: Any - 

Relación: [References] http://dx.doi.org/10.1002/mame.201600515
[References] Sí

Fecha de contribución: 19-dic-2017

Contacto:

Localización:
* doi: 10.1002/mame.201600515
* issn: 1438-7492
* e-issn: 1439-2054
* Macromolecular Materials and Engineering 302 (2017)
* 10.1002/mame.201600515

Otros recursos del mismo autor(es)

  1. PCDD/F determination in sewage sludge composting. Influence of aeration and the presence of PCP Composting of sewage sludge is a common practice for sludge disposal. Some previous studies found hi...
  2. Factors related to municipal costs of waste collection service in Spain Actual cost of services of local entities (CESEL, in Spanish) is the name of a new official source o...
  3. Comparison of 60 GHz Planar Array Antenna on LTCC and Rogers Substrates for 5G applications The spectrum currently allocated for mobile service is fragmented into different frequency bands (80...
  4. Combined graft-elongation maps from in vivo kinematics data for knee laxity assessment during navigated ACL reconstruction (poster)
  5. The skewness of commodity futures returns International audience

Otros recursos de la mismacolección

  1. Morphological and microstructural characterization of nanostructured pure α-phase W coatings on a wide thickness range © 2014 Elsevier B.V. All rights reserved. Nanostructured tungsten (nanoW) coatings have been deposit...
  2. Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature © 2015 Acta Materialia Inc. The mechanical behaviour in tension and compression of an extruded Mg-1 ...
  3. Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method Directionally Solidified Eutectics: Selected Papers from DSEC IV.
  4. Directionally solidified eutectic ceramic oxides 99 pages, 8 figures, 7 tables,
  5. Control of the structure and properties of SEBS nanocomposites via chemical modification of graphene with polymer brushes Incorporation of small quantities of graphene modified with polystyrene brushes into poly (styrene-b...

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.