1) La descarga del recurso depende de la página de origen
2) Para poder descargar el recurso, es necesario ser usuario registrado en Universia


Opción 1: Descargar recurso

Opción 2: Descargar recurso

Detalles del recurso

Descripción

Photo-reversible polyurethane (PU) coatings based on coumarin diol (CD) are obtained. Initially, pre-polymers based on different amounts of coumarin (5, 15, and 25 mol%) and 1,6-hexamethylene diisocyanate are prepared to obtain PUs with a large incorporation of CD and high molecular weight. The pre-polymer is posterior reacted with poly(ε-caprolactone) diol (PCL-diol), either with molecular weight (Formula presented.) = 530 or 2000 g mol. The thermal stabilities of the PUs are studied using thermogravimetric analysis. Polymers with a higher content of CD present higher stability. The thermal transitions and the mechanical response are analyzed using differential scanning calorimetry and strain-stress tests, respectively. Moreover, the photo-reversibility of CD-based PUs is followed by UV absorption. In general, photo-dimerization induces better mechanical properties of the final PUs. Materials obtained with short PCL-diol ((Formula presented.) = 530 g mol) and the highest amount of CD present higher reversibility processes. Therefore, these polymers are promising for application as coating systems. (Figure presented.).

Pertenece a

Digital.CSIC  

Autor(es)

Salgado, Cástor -  Arrieta, Marina P. -  Peponi, Laura -  Fernández -  García, Marta -  López, Daniel - 

Id.: 70077644

Idioma: eng  - 

Versión: 1.0

Estado: Final

Palabras clavePhotoreversible - 

Tipo de recurso: Artículo  - 

Tipo de Interactividad: Expositivo

Nivel de Interactividad: muy bajo

Audiencia: Estudiante  -  Profesor  -  Autor  - 

Estructura: Atomic

Coste: no

Copyright: sí

: closedAccess

Requerimientos técnicos:  Browser: Any - 

Relación: [References] http://dx.doi.org/10.1002/mame.201600515
[References] Sí

Fecha de contribución: 19-dic-2017

Contacto:

Localización:
* doi: 10.1002/mame.201600515
* issn: 1438-7492
* e-issn: 1439-2054
* Macromolecular Materials and Engineering 302 (2017)
* 10.1002/mame.201600515

Otros recursos del mismo autor(es)

  1. RawMatCop: Developing Skills at the intersection between Earth observation and the raw materials community The RawMatCop programme was launched in 2017 and aims to develop skills, expertise, demonstrations, ...
  2. El chapitel de Pedro Ribera en la Iglesia de Nuestra Señora de Monserrat, en Madrid Estudio histórico y constructivo del chapitel de la iglesia de nuestra señora de Montserrat en madri...
  3. Non-stationary rician noise estimation in parallel MRI using a single image: A variance-stabilizing approach Parallel magnetic resonance imaging (pMRI) techniques have gained a great importance both in researc...
  4. Development of improved bricks (LM) and use of new technologies for ecological bricks (LE) elaboration Brick is a material that has been widely used in construction sector, however, it has not received t...
  5. Performance of B-10 + ZnS(Ag) neutron detectors in RPM for the detection of special nuclear materials In homeland security, neutron detection is used to prevent the smuggling of Special Nuclear Material...

Otros recursos de la mismacolección

  1. Influencia de residuos de carbón activado en la evolución térmica de morteros eco-eficientes PRE-CONPAT 16 España, “Avances en control de calidad, patología y recuperación de la construcción”; ...
  2. Synthesis of highly transparent Er-doped fluorotellurite glass-ceramics through controlled crystallization 7th International Conference on Optical, Optoelectronic and Photonic Materials and Applications, Po...
  3. Pulsed Laser Deposition of EuO films from the reduction of a Eu2O3 ceramic target Lille (France) from May 2 to 6, 2016 ; http://www.european-mrs.com/meetings/2016-spring-meeting
  4. Luminescence properties of Er3+ ions in nanocrystalline glass-ceramics Conferencia invitada ; International Conference on Transparent Optical Networks ICTON, University of...
  5. Morphological and microstructural characterization of nanostructured pure α-phase W coatings on a wide thickness range © 2014 Elsevier B.V. All rights reserved. Nanostructured tungsten (nanoW) coatings have been deposit...

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.