1) La descarga del recurso depende de la página de origen
2) Para poder descargar el recurso, es necesario ser usuario registrado en Universia


Opción 1: Descargar recurso

Detalles del recurso

Descripción

[EN] This paper analyzes the influence of the construction process on short- and long-term deflections on a reinforced concrete structure poured on-site by a portable industrialized system. A parametric analysis was carried out by the Finite Elements Method (FEM) that considered: a) type of construction process with reshoring or clearing (partial striking); b) the number of successively shored floors and c) the number of shores used on each floor. All three factors were especially important for the values of short- and long-term deflections, which were highest in the reshoring processes with the lowest number of successively shored floors and the lowest number of shores per floor. Deflections obtained were compared with the limits laid down by ACI 318-14 and as calculated by this code¿s simplified method. The long-term deflections were seen to be almost double than those obtained by applying the ACI 318-14 code¿s simplified method and in some cases these deflections were above the established limits. It can thus be concluded that the load history of a building under construction should be taken into account in order to satisfy a structure¿s in-service conditions and durability.

Pertenece a

RiuNet. Repositorio institucional de la Universitat de Valencia  

Autor(es)

Alvarado Vargas, Yezid Alexander -  Buitrago, Manuel -  Gasch, Isabel -  Domínguez, María N. -  Cipagauta, Miguel A. - 

Id.: 71077003

Idioma: eng  - 

Versión: 1.0

Estado: Final

Palabras claveClearing - 

Tipo de recurso: info:eu-repo/semantics/article  -  info:eu repo/semantics/publishedVersion  - 

Tipo de Interactividad: Expositivo

Nivel de Interactividad: muy bajo

Audiencia: Estudiante  -  Profesor  -  Autor  - 

Estructura: Atomic

Coste: no

Copyright: sí

: Reserva de todos los derechos

Requerimientos técnicos:  Browser: Any - 

Relación: [References] STRUCTURAL ENGINEERING AND MECHANICS
[References] https://doi.org/10.12989/sem.2017.64.2.173

Fecha de contribución: 11-mar-2018

Contacto:

Localización:
* 1225-4568
* 10.12989/sem.2017.64.2.173

Otros recursos del mismo autor(es)

  1. Beneficios económicos de la certificación LEED. Edificio Centro Ático: caso de estudio / Economic benefits of LEED certification: a case study of the Centro Ático building [EN] This article discusses the economic benefits of the implementation of the sustainable building ...
  2. Estudio técnico económico de alternativas del proceso de cimbrado y descimbrado en la construcción de un edificio de forjados de losa maciza de hormigón armado [EN] The aim of this paper is to define alternative construction processes for a building with reinf...
  3. Technical and economic study of striking and clearing operations in buildings under construction. Case study in Bogotá, Colombia This paper evaluates the economic benefits of shorter construction times that can be attained by app...
  4. Estrategia Para La Adopción De Las Niif En La Pymes De Tunja La globalización financiera ha exigido la implementación de estándares de información promovidos des...
  5. En el umbral del cambio: reforma de la monarquía o democracia republicana

Otros recursos de la mismacolección

  1. A new model and metaheuristic approach for the energy-based resource-constrained scheduling problem [EN] This article focuses on obtaining sustainable and energy-efficient solutions for limited resour...
  2. Coding SNPs analysis highlights genetic relationships and evolution pattern in eggplant complexes [EN] Brinjal (Solanum melongena), scarlet (S. aethiopicum) and gboma (S. macrocarpon) eggplants are ...
  3. The Harmonic Order Tracking Analysis Method for the Fault Diagnosis in Induction Motors Under Time-Varying Conditions [EN] This paper introduces a new approach for improving the fault diagnosis in induction motors unde...
  4. MAK-10 : A Long Shelf-life Charentais Breeding Line Developed by Introgression of a Genomic Region from Makuwa Melon This work has been carried out in the framework of the Programa de Valorizacion y Recursos Conjuntos...
  5. The programmable processor [EN] Reconfigurable optical chips made from 2D meshes of connected waveguides could pave the way for...

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.