Recursos de colección

ORBi Open Repository and Bibliography (311.807 recursos)

In may 2007, the ULg's Administrative Board (joined in June 2007 by the FUSAGx) decided to create an institutional repository and defined a strong institutional self-archiving policy to increase the visibility, accessibility and impact of the University's publications (Board's decision). This decision led to the official launch, in November 2008, of the ORBi platform including both the Academic Bibliography and the Institutional Repository of the Wallonia-Europe University Academy.

Engineering, computing & technology => Chemical engineering

Mostrando recursos 1 - 20 de 62

  1. Experimental investigation on vapor pressure of desiccant for air conditioning application

    Bouzenada, Smain Nasr Eddine; Fraikin, Laurent; Léonard, Angélique
    Peer reviewed

  2. Successive dehumidification/regeneration cycles by LiCL desiccant for air-conditioning system

    Bouzenada, S.; Kaabi, A. N.; Fraikin, Laurent; Léonard, Angélique
    Peer reviewed

  3. Synthesis of bimetallic catalysts supported on alumina by an aqueous sol-gel process

    Lambert, Stéphanie
    Peer reviewed

  4. Reforming of toluene with bimetallic catalysts supported on alumina and synthesized by an aqueous sol-gel process

    Lambert, Stéphanie
    Peer reviewed

  5. Reforming of toluene with bimetallic catalysts supported on alumina and synthesized by an aqueous sol-gel process

    Wolfs, Cédric; Claude, Vincent; Courson, Claire; Lambert, Stéphanie
    Peer reviewed

  6. Comparison of hydrodynamics in standard stainless steel and single-use bioreactors by means of an Euler-Lagrange approach

    Delafosse, Angélique; Calvo, Sébastien; Collignon, Marie-Laure; Toye, Dominique
    Peer reviewed

  7. Air Capture and Power-to-Fuel to Close the Carbon Loop

    Léonard, Grégoire; Giulini, Davide; Villarreal-Singer, D; Lackner, K S

  8. Air Capture and Power-to-Fuel to Close the Carbon Loop

    Léonard, Grégoire; Villarreal-Singer, D; Lackner, K S

  9. Oxygen solubility and mass transfer in amine solutions for applications in post - combustion CO 2 capture

    Léonard, Grégoire; Crosset, Cyril; Dumont, Marie-Noëlle; Toye, Dominique

  10. Integrated Project with Focus on Energy Transition and Circular Economy for Developing Engineering Students' Soft Skills

    Léonard, Grégoire; Pfennig, Andreas; Toye, Dominique; Gommes, Cédric; Lambert, Stéphanie; Job, Nathalie; Léonard, Angélique; Manfredini, Tiber; Dumont, Marie-Noëlle
    The present work reports the experience of an integrated project developed at the University of Liege for master students in chemical engineering. The goals are to promote the acquisition of soft skills and to consolidate technical knowledge by integrating and linking chemical engineering disciplines usually taught separately. A case study was selected to address some of the challenges related to energy transition: students had to design the energy system of a remote island and make it as energy independent and CO2-neutral as possible by 2030. The course of action during the academic year, the assessment of soft skills, and the...

  11. Solid-liquid suspension of microcarriers in stirred tank bioreactor - Experimental and numerical analysis

    Delafosse, Angélique; Loubière, Céline; Calvo, Sébastien; Toye, Dominique; Olmos, Eric
    Peer reviewed

  12. Valdem Project : From building waste LCA to buildings circular economy

    Groslambert, Sylvie; Roy, Aubin
    From resource prospective, building and construction sector is responsible for more than third of global resource consumption, including 12% of the fresh water use and its generation of solid waste is estimated to be 40% of the total waste volume. At European level, construction and demolition waste is the largest waste stream representing one third of all waste produced in EU. Therefore the resource efficiency and management is crucial in building construction. A very significant part of the Construction and Demolition Waste (CDW) is not recycled today. Also a very limited part is used as a recycled content in the...

  13. Analysis of PIV measurements using modal decomposition techniques, POD and DMD, to study flow structures and their dynamics within a stirred-tank reactor

    de Lamotte, Anne; Delafosse, Angélique; Calvo, Sébastien; Toye, Dominique
    Peer reviewed

  14. Analysis of PIV measurements using modal decomposition techniques, POD and DMD, to study flow structures and their dynamics within a stirred-tank reactor

    de Lamotte, Anne; Delafosse, Angélique; Calvo, Sébastien; Toye, Dominique
    Peer reviewed

  15. Transitioning from conventional batch to microfluidic processes for the efficient singlet oxygen photooxygenation of methionine

    Mendoza Gallego, Carlos; Emmanuel, Noémie; Pàez Martinez, Carlos; Dreesen, Laurent; Monbaliu, Jean-Christophe; Heinrichs, Benoît
    Peer reviewed

  16. Research activities in the field of reactor engineering in the PEPs group of the Chemical engineering Dpmt at ULiege

    Toye, Dominique; Delafosse, Angélique; Calvo, Sébastien; de Lamotte, Anne

  17. Research activities in the field of reactor engineering in the PEPs group in the Chemical engineering Department of the Université de Liège

    Toye, Dominique; Delafosse, Angélique; de Lamotte, Anne; Calvo, Sébastien

  18. Coalescence in Highly Viscous System

    Leleu, David; Pfennig, Andreas; Bruns, Nicole
    Peer reviewed

  19. Solvent Extraction Design for Highly Viscous Systems

    Quaresima, Maria Chiara; Schmidt, Markus; Pfennig, Andreas
    The change from fossil-based feedstock to bio-based raw materials will lead to changes in the molecular structure of reagents used in the chemical industry. Bio-based raw materials are richer in oxygen, leading to intermediates and products rich in oxygen as well. This will lead to lower vapor pressure and higher viscosity of the systems. Thus liquid-based separations like solvent extraction will increase in importance. Also separation-process design needs to be adapted to properly account for higher viscosities. With drop-based simulation, extraction-column performance can be predicted to better than 10% accuracy, being time and resources saving compared to pilot-plant experiments. In...

  20. Standardized settling cell to characterize liquid-liquid dispersion

    Leleu, David; Pfennig, Andreas
    Peer reviewed

Aviso de cookies: Usamos cookies propias y de terceros para mejorar nuestros servicios, para análisis estadístico y para mostrarle publicidad. Si continua navegando consideramos que acepta su uso en los términos establecidos en la Política de cookies.